Details
The MAS21 Bridge Completion module from MeasureX, is
suitable for both 350Ω and 120Ω strain gauges. It comes in an
IP65 rated Junction Box housing with cable glands for entry and exit wiring (strain gauge wiring requires additional glue-lined heat shrink to seal). It utilizes very high precision resistors with tolerance of ±0.01 % and temperature Coefficient of ±2 PPM.
It allows the following connection types:
3-Wire 120 Ω ¼ Bridge
3-Wire 350 Ω ¼ Bridge
2-Wire 120 Ω ¼ Bridge
2-Wire 350 Ω ¼ Bridge
Any resistance Half Bridge including 120 Ω and 350 Ω.
Accuracy (combined LRH) | Check data sheet |
---|---|
Output Signal | No |
Temp. Coefficient of Zero | No |
Temp. Coefficient of Span | No |
Operating Temp. Range | No |
Bridge completion for both 120Ω and 350Ω strain gauges
Supports completion of both quarter bridge and half bridge
Tolerance: ±0.01% and temperature coefficient: ±2ppm
IP65 junction box housing with cable glands